MOOSE ZXSSD Guia do Utilizador descarregar pdf (Página 10)

After entering programming mode, press the ‘2’ key for Set Clock programming. The Control Station will go into clock set

mode.

The SSD Control Station will have a Set Clock prompt display. The LCD and VFD Control Station will display the current

hour, minute, month, day, and year (HH:MM MM/DD/YY). The zone LEDs on an LED Control Station will remain off.

The hour must be entered in 24-hour format.

The operator may start entering numbers from the first hour digit. As a number is entered, it is displayed and the cursor

automatically moves to the next position on the LCD and VFD Control Station. When a digit is entered, the Control Station

will display:

If the CLEAR key is pressed, the cursor will move back to the first hour digit and any changes that were entered will be

erased, i.e.: the current time and date will be re-displayed. If the CLEAR key is pressed and no changes have been entered,

the Control Station will return to idle with no changes to the time or date.

3.1.2 Set Clock

After entering programming mode, press the ‘1’ key to perform a Remote Connect. The control will seize the telephone line

and the control station will return to idle. This feature is used to manually connect the control to a remote programming

computer.

3.1.1 Remote Connect

This section will describe Installer Level Programming as performed locally from a Control Station.

To enter Installer Level Programming, press the PROGRAM (9) key and enter the installer passcode (default = 9632). The

Control Station will then prompt you to select a programming option from 1 to 9 where:

1 = REMOTE CONNECT 6 = RESTORE FACTORY DEFAULTS

2 = SET CLOCK 7 = SET DAYS UNTIL NEXT COMM TEST

3 = EDIT FUNCTION MAP 8 = CALL RPM

4 = EDIT ZONE NAMES 9 = PROGRAM RF DATA

5 = DEFAULT USER CODE 1

3.1 Menu Options

Installer Level Programming3

REMOTE CONNECT

14:58 02/11/96

ENTER = COMPLETE

24:58 02/11/96

ENTER = COMPLETE

14:58 02/11/96

ENTER = COMPLETE

WWW.DIYALARMFORUM.COM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Sem comentários

MOOSE ZXSSD Guia do Utilizador Página 10