MOOSE Z950 Manual do Utilizador descarregar pdf (Página 44)

Deleting A Code

1. The system must be disarmed.

2. Press key 9 and hold for three seconds. The keypad will beep three

times.

3. Enter the Master User Code. The keypad will beep two times. The

READY and ARMED indicators will blink alternately, and the other

indicators will blink in sequence with each other when the program

ming mode is successfully entered (see remote programming note on

Page 3-1).

4. Press key 1, then, for the Z950/Z880, press key 2 or, for the Z900,

press key 0. Next, press the Bypass (#) key which instructs the

control

that you wish to delete a code. The keypad will beep three times to

signify acceptance.

5. Enter the number of the code to be deleted (2-8) for Z950/Z880 or (2-6)

for Z900.

6. The code is now deleted. The system will automatically exit the

programming mode.

Programming A Temporary Code

An optional feature of your system allows you to assign a certain number of

valid

uses to temporary code. User Code 6 of the 6 zone control or User Code 8 of

the 8 zone control may be programmed as a Temporary User Code with a

limited number of valid uses, after which it becomes inoperable. After the code

has been used the programmed amount of times, it automatically becomes

disabled. This code may be assigned to a maintenance person, a maid, or

anyone who you would like to be able to arm and disarm the system for a

selected number of times without having to give out your regular code. After the

uses have expired, the code will cease to function. It can be re-enabled by

programming in another number indicating how many times that it can be used.

It will not be necessary to re-program the actual code unless changing the code

itself is desired.

I .The system must be disarmed.

Press key 9 and hold for three seconds. The keypad will beep three

times.

3. Enter the Master User Code. The keypad will beep two times. The

READY and ARMED indicators will blink alternately, and the other

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51

Sem comentários

MOOSE Z950 Manual do Utilizador Página 44