MOOSE Z950 Manual do Utilizador descarregar pdf (Página 17)

1.6 Special Features

Chime Mode Operation

The CHIME mode allows audible monitoring of zones while the system is dis-

armed. When the CHIME mode is active, the keypad sounder will beep when ever

a perimeter burglar defined zone (door, window, etc.) indicator is opened.

For example, the CHIME feature will cause the keypad to beep two times whenev-

er the front door has been opened. Many businesses use this type of signal to

announce that a customer has entered. In a residential application, the CHIME is

useful for monitoring opening of doors by children.

The CHIME feature does not annunciate interior zones.

To Turn CHIME On

I .The system must be disarmed.

2. Press the "6" key and hold for three seconds. The keypad will

beep three times to signify that the CHIME has been turned on.

3. The keypad will now beep two times when any burglar zone is

opened.

To Turn CHIME Off

Press the "6" key and hold for three seconds. The keypad will beep two times to

signify that the CHIME has been turned off.

Force Arming (This feature is disabled in U.L. Listed systems)

Your system may be programmed for quick arming even with one or more zones

faulted. In this condition, when an attempt is made to arm the system with faulted

zones (READY light off), the keypad will emit a three second error tone, indicating

that the system refused to arm. If a second attempt to arm is made within eight

seconds after the tone quits, all faulted zones will automatically be bypassed and the

system will Force Arm. Depending upon how your system was programmed at the

time of installation, force armed zones will either be per-manently bypassed until

disarming or may return to operation when or if they become operable.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 50 51

Sem comentários

MOOSE Z950 Manual do Utilizador Página 17