MOOSE Z950 Manual do Utilizador descarregar pdf (Página 41)

Programming 3

Certain features of your system are programmable through the keypad. The pro-

gramming mode is entered by pressing key 9 and holding for three seconds, then

entering the Master User Code. Other programming functions may be possible that

are not detailed in this section. Consult your security company representative for a

list of the user programmable features of your system.

WARNING

DO NOT ATTEMPT TO PROGRAM THE SYSTEM UNLESS YOU HAVE BEEN

PROPERLY TRAINED ON PROGRAMMING PROCEDURES, AND YOU ARE SURE

THAT YOU FULLY UNDERSTAND THIS OPERATION.

NOTE

Regarding Remote Programming:

If the alarm or Zone 8 indicator lights steady after entering the programming

mode, your installer has enabled the Remote Programming option. This feature

enables the installing company (or someone assigned by them) to remotely

service and control your system.

3.1 User Codes

Your system may be programmed to accept up to seven regular User Codes and

one Master User Code. Each code may be comprised of any four digit sequence.

(Do not program 1234 or 1111 as User Codes). Codes may be added, deleted,

or changed as necessary.

The Master User Code (code 1) performs all of the User Code functions plus

allows access to the programming mode.

User's Manual 3-1

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 50 51

Sem comentários

MOOSE Z950 Manual do Utilizador Página 41